Deep Socket for Installing Bravo III Propeller Nut Anodes
Deep Socket for Installing Bravo 3 Propeller Nut Anodes
Deep Socket for Installing Bravo 3 Propeller Nut Anodes
Specifications:
  • 1-7/16" 6-Point Deep Socket
  • 3-1/2" Length Overall
  • 1/2" Square Drive
  • Chrome Finish
Installation Instructions:
  1. Remove existing Bravo 3 aft propeller nut.
  2. Install the anode’s propeller nut with a 1-7/16" deep socket.
  3. Tighten propeller nut to 60 foot-pounds of torque.
  4. Fasten the anode with the bolt supplied.  
  5. Tighten bolt so that the base of the anode has firm contact with the propeller’s hub.
Deep Socket for Installing Bravo 3 Propeller Nut Anodes
Copyright 2003-2008 BoatZincs.com.  All rights reserved.   BoatZincs is a trademark of BoatZincs.com.