BoatZincs.com, The Online Superstore for Zinc Anodes


Call: 1-978-841-9978     Toll Free: 1-866-439-9364








 
MG-H-24 Magnesium Anode with Plastisol Coating
$159.09  
MG-24-H Magnesium Hull Anode
MG-H-24 Magnesium Hull Anode
with Plastisol Coating
Mil-Spec A-21412 (SH) Magnesium Alloy

Anode Dimensions:  18" x 9" x 2-1/4"
Horizonal Mounting Hole Distance:  8" center-to-center
Vertical Mounting Hole Distance:  15" center-to-center
Mounting Hole Diameter:  3/4"
Weight:  25.9 lbs overall

Shipped only via UPS Ground within the Continential U.S.

MG-H-24 Magnesium Hull Anode  MG-H-24 Magnesium Hull Anode


Weighs about 24 pounds and contains cast-in steel straps with 3/4" holes for mounting.  Widely used on steel hull service boats.  Anode has a plastisol (polyvinyl chloride) coating which serves as an excellent current barrier shield.  The plastisol coating is designed to be cut away from the anode as needed for adjusting surface area contact and current output.

Magnesium anodes are effective and economical corrosion fighters that protect a variety of steel structures in a wide variety of environments, including salt, brackish and fresh water:

  • Hulls of ships, barges, tugs and boats
  • Ballast tanks of ore carriers and similar vessels
  • Bulkheads
  • Water storage tanks
  • Piers and pilings
  • Pipelines
  • Heat exchangers
Part Number Variations: MG-24-H, MG24H, MG-24H, MG-H-24W, MG-24-H-W, MG24HW, MG-24HW, CMM24HGM, GA-MG-H-24W