| Bennett Trim Tab Zinc Anode Kit - BNT-1 |
Specifications:
Anodes mount to existing holes in trim tabs. The
kit includes two (2) anodes and four (4) stainless
steel mounting screws. These are priced and
used per pair with the bolts included.
Designed to mount on Bennett Trim Tabs where
the actuator mounts to the plane. The bolts
holding the actuator to the plane must be
removed and the zinc installed using the same
bolt holes and the long bolts (1/4-20 x 1-1/4”)
included in the kit. Anodes measure 3-3/4" L x 1-
1/8" W x 1/2" H. Mounting holes are 1-1/2”
center to center.
Anodes mount to existing holes in trim tabs. The
kit includes two (2) anodes and four (4) stainless
steel mounting screws. These are priced and
used per pair with the bolts included.
Designed to mount on Bennett Trim Tabs where
the actuator mounts to the plane. The bolts
holding the actuator to the plane must be
removed and the zinc installed using the same
bolt holes and the long bolts (1/4-20 x 1-1/4”)
included in the kit. Anodes measure 3-3/4" L x 1-
1/8" W x 1/2" H. Mounting holes are 1-1/2”
center to center.
Copyright 2003-2008 BoatZincs.com. All rights reserved. BoatZincs is a trademark of BoatZincs.com.