| Aluminum Grouper Hanging Anode |
Description:
Three pound overboard aluminum anode with 15 ft. vinyl coated
galvanized steel cable and electrical connector for grounding. This
Grouper features Mil-Spec aluminum alloy with a galvanic voltage of
-1.10v in seawater to offer the highest level of corrosion protection
possible for a vessel while at the dock. Simply attach to the vessel’s
DC ground and hang overboard. It’s a very effective solution to
extending the life of your boat’s zinc or aluminum anodes. A Grouper
is strongly recommended for corrosion protection of vessels with metal
hulls or aluminum outdrives. On sailboats, DC ground is conveniently
available on any shroud or backstay.
Specifications:
Weight: 3 lbs nominal, 2.6 lbs min.
Three pound overboard aluminum anode with 15 ft. vinyl coated
galvanized steel cable and electrical connector for grounding. This
Grouper features Mil-Spec aluminum alloy with a galvanic voltage of
-1.10v in seawater to offer the highest level of corrosion protection
possible for a vessel while at the dock. Simply attach to the vessel’s
DC ground and hang overboard. It’s a very effective solution to
extending the life of your boat’s zinc or aluminum anodes. A Grouper
is strongly recommended for corrosion protection of vessels with metal
hulls or aluminum outdrives. On sailboats, DC ground is conveniently
available on any shroud or backstay.
Specifications:
Weight: 3 lbs nominal, 2.6 lbs min.
Copyright 2003-2008 BoatZincs.com. All rights reserved. BoatZincs is a trademark of BoatZincs.com.