Description
FREE!!! Bottom Paint Stencil for the R-2 Anode (One pair)
Adhesive backed paint stencils that protect the mounting areas of your rudder and/or trim tab anodes areas from over paint. These are precision die cut to fit the base of our R-2, R-3, R-3H, R-4 and R-5 anodes (two-piece and single-piece). They provide the painter with professional looking results and ensure that the anode mounting area is paint-free.
Usage: See installation photos above.
- With sand paper or a wire brush, clean the metal area that makes direct contact with the anode.
- Remove the adhesive back of the stencil and center it on both sides of the anode’s mounting position.
- Apply anti-fouling bottom paint.
- Remove stencil.
- Attach anode.
- FREE: Limit of one stencil per each anode piece ordered.
Part Number Variations:
