Adhesive backed paint stencils that protect the mounting areas of your rudder and/or trim tab anodes areas from over paint. These are precision die cast to fit the base of our R-2, R-3, R-3H, R-4 and R-5 anodes. They provide the painter with professional looking results and ensure that the mounting area for your rudder anodes are paint-free.
Usage: (Click here for photos)
- With sand paper or a wire brush, clean the metal area that makes direct contact with the anode.
- Remove the adhesive back of the stencil and center it on both sides of the anode’s mounting position.
- Apply anti-fouling bottom paint.
FREE: Limit of two (one set) per each rudder anode ordered